Asphalt Crack Filler

   Easily and effectively repairs cracks in bitumen.

   Product based on bitumen and rubber.

   Very good adhesion.

   Flexible treatment of cracks, allowing expansion and movement.

   Very fast action: return to service after 2 hours.

   Provides long-lasting protection against water penetration.

   Very economical: 1 liter for 20 m².

   Recoatable with Ferber Painting road paint.

INSTRUCTIONS:

•   Clean the support before application: sweep the surface and remove the friable parts of the crack with a metal brush.

•   Shake the product before use.

•   For small cracks (up to 3 mm), use a pitcher, pour the product into the crack and spread the excess liquid around the crack using a brush to obtain a film thin. Let dry 2 to 4 hours.

•   For larger cracks (up to 250 mm), mix the product with sand to obtain a pasty mortar. Using a trowel, apply in the crack and smooth the surface. Leave to dry for 6 to 10 hours.

•   Once dry, sprinkle the treated surface with fine sand or cement to remove any sticky residue.

•   It is possible to cover the treated surface with our road paint when it has completely dried.