Installing baseboards is one of those finishing touches that can completely transform the look of a room. Whether you are renovating an old apartment or finishing a brand new build, a properly fitted baseboard hides gaps between the wall and the floor, protects your walls from scuffs, and gives your interior a polished, professional appearance. But here is the truth that most DIY guides forget to mention: everything depends on choosing the right product. A poor quality adhesive will ruin even the most carefully measured and cut baseboard, leading to gaps, peeling, and hours of wasted work.<\/p>\n\n\n\n
That is why, before we even get into the step-by-step process, we want to be clear about one thing. If you want your baseboards to stay perfectly glued for years without cracking, lifting, or yellowing, you need a professional grade adhesive. This is exactly why we recommend Parquet Glue from Ferber Painting. It is not just another glue on the shelf. It is the only baseboard and parquet adhesive on the market that comes with a full satisfied or refunded guarantee, meaning you can try it completely risk free. If for any reason you are not happy with the result, we will refund you, no questions asked. No other brand on the market currently offers this level of confidence in their product.<\/p>\n\n\n\n
In this complete guide, we will walk you through everything you need to know about how to fit and glue a baseboard, from choosing your materials to the final finishing touches, while explaining why Ferber Painting Parquet Glue consistently outperforms other adhesives available today. We will also cover common mistakes people make during installation, how to handle tricky corners and uneven walls, and how to maintain your baseboards once they are installed, so that by the end of this article you will feel fully confident tackling this project yourself, no matter the size of your home or the shape of your rooms.<\/p>\n\n\n\n
Many people assume that gluing a baseboard is a simple task that does not require much thought. In reality, the type of glue you use will determine whether your baseboards stay firmly in place for decades or start peeling away from the wall after just a few months. Cheap adhesives often shrink as they dry, creating small gaps that let dust and moisture in. Some products also become brittle over time, especially in rooms with fluctuating temperatures like kitchens or bathrooms.<\/p>\n\n\n\n
Think about a typical living room that goes through seasonal changes. In winter, heating systems dry out the air and cause wood to contract slightly. In summer, humidity levels rise and the same wood expands. A baseboard glued with a rigid, low quality adhesive cannot follow these tiny movements, so over time you will start to notice hairline cracks forming at the joints, or worse, entire sections popping away from the wall. This is not a hypothetical scenario. It is one of the most common complaints we hear from customers who previously tried cheaper alternatives before switching to a proper adhesive.<\/p>\n\n\n\n
Ferber Painting Parquet Glue was specifically engineered to solve these problems. It offers a strong initial grab, meaning your baseboard stays in place immediately after application, without the need for extra clamps or tape. It also remains flexible once fully cured, which allows it to absorb small movements caused by temperature changes or humidity, something that rigid, low quality glues simply cannot do. This flexibility is particularly important in older homes, where walls are rarely perfectly straight and floors can shift slightly over the years due to settling foundations.<\/p>\n\n\n\n
Here are some of the main reasons professionals and DIY enthusiasts alike are switching to Ferber Painting Parquet Glue:<\/p>\n\n\n\n
This last point deserves to be repeated because it is genuinely rare in this industry. Ferber Painting is currently the only company offering a full satisfied or refunded guarantee on its parquet and baseboard glue. This means that when you order from us, you are not taking a gamble. You are making a risk free investment in a product that has been tested and trusted by thousands of customers around the world. When you consider how much time, effort, and money go into a baseboard installation project, from buying materials to cutting and painting them, it makes little sense to leave the most critical step, the bonding itself, to a product with no guarantee behind it.<\/p>\n\n\n\n
It is also worth mentioning that the wrong adhesive does not just cause aesthetic problems. It can also lead to real structural issues over time. Moisture that seeps behind a poorly glued baseboard can encourage mold growth, especially in bathrooms and kitchens where humidity levels are naturally higher. A water resistant, flexible adhesive like Parquet Glue helps create a tighter seal against the wall, reducing the chances of moisture infiltration and the problems that come with it.<\/p>\n\n\n\n
There are dozens of adhesive brands on the market claiming to be the best, but very few actually deliver consistent results. What sets Ferber Painting apart is the combination of product quality, customer service, and logistics. Let us break down exactly why our Parquet Glue stands out from the competition.<\/p>\n\n\n\n
First, the formula itself has been developed to bond quickly and permanently to a wide variety of surfaces, including plaster, concrete, brick, and painted walls. This versatility means you do not need to buy multiple products depending on your wall type, saving you both time and money. Whether you are working on a modern apartment with drywall partitions or an older stone house with uneven plaster walls, the same tube of glue will give you reliable results.<\/p>\n\n\n\n
Second, our glue is designed with ease of application in mind. The nozzle allows for precise, controlled application, so you avoid the mess and waste that often comes with cheaper alternatives. This precision also means better coverage with less product, which ultimately makes our glue more cost effective in the long run, even if the upfront price seems slightly higher than generic brands. Many customers who switch from a generic tube of construction adhesive tell us they are surprised at how much further a single cartridge of Parquet Glue goes, simply because there is no wasted product oozing out from an inconsistent nozzle or a glue that requires double application to achieve the same hold.<\/p>\n\n\n\n
Third, and perhaps most importantly, we stand behind our product with a satisfied or refunded guarantee. Very few companies in the flooring and finishing industry are confident enough in their adhesive to offer this. We are, because we know that once you try Parquet Glue, you will see the difference in strength, flexibility, and finish. This guarantee is not a marketing gimmick. It reflects our internal quality control standards and our confidence that the product performs exactly as described, batch after batch.<\/p>\n\n\n\n
Finally, ordering is simple. Our product is available directly on our website, with secure online payment options that make checkout fast and stress free. Once your order is placed, Ferber Painting ships internationally through a reliable network of trusted carriers, meaning that no matter where you are located, your Parquet Glue will arrive quickly and safely at your door. We understand that renovation projects often run on tight timelines, so we prioritize fast processing and shipping to make sure your materials arrive when you actually need them, not weeks after your project deadline has already passed.<\/p>\n\n\n\n
Behind every successful adhesive is a chemical formula designed with a specific purpose in mind. Parquet Glue uses a solvent based formulation that allows it to cure into a strong yet slightly elastic bond. This is different from many rigid epoxy based adhesives that, while extremely strong initially, tend to become brittle and prone to cracking as the years go by. The elasticity built into our formula means the glue can flex along with natural building movements without losing its grip, which is exactly the kind of long term performance you want from a product that is meant to be invisible once installed, quietly doing its job for decades.<\/p>\n\n\n\n
Now that you understand why the product matters so much, let us go through the actual installation process. Follow these steps carefully to achieve a clean, professional result.<\/p>\n\n\n\n
Before starting, gather everything you will need. This includes your baseboards, a measuring tape, a pencil, a miter saw or hand saw, sandpaper, a caulking gun if your glue comes in a cartridge, a damp cloth for cleanup, and of course your Ferber Painting Parquet Glue. Having everything ready before you start will save you time and prevent the glue from drying out while you search for a missing tool.<\/p>\n\n\n\n
It is also a good idea to lay out all your baseboard pieces in the room where they will be installed, ideally along the walls where you plan to use them. This lets the wood acclimate to the room temperature and humidity for at least 24 hours before installation, which reduces the risk of warping or expansion issues after the glue has cured. If you are working with MDF baseboards, this acclimation step is especially important, since MDF tends to be more sensitive to sudden humidity changes than solid wood.<\/p>\n\n\n\n
A few additional tools can make the job significantly easier. A small level will help you check that your baseboard sits evenly along the wall, especially useful if your floor is not perfectly flat. A rubber mallet can help gently tap stubborn pieces into position without damaging the finish. And a good pair of safety glasses is essential whenever you are cutting wood or MDF, since dust and small splinters can easily fly up during cutting.<\/p>\n\n\n\n
Measure each wall carefully, taking note of corners, doorways, and any obstacles. Baseboards typically need to be cut at a 45 degree angle for inside and outside corners, so a miter saw will give you the cleanest results. Always measure twice before cutting to avoid wasting material. If you are working with long walls that require multiple pieces of baseboard, plan your cuts so that the joints fall in the least visible areas of the room.<\/p>\n\n\n\n
For inside corners, many professionals prefer to use a technique called coping instead of a simple miter cut, especially when working with wood baseboards. Coping involves cutting the profile of the baseboard so that one piece fits snugly against the face of the adjoining piece, rather than relying on two 45 degree angles meeting perfectly. This method tends to hide small imperfections in wall corners far better than a standard miter joint, since very few corners in real homes are a perfect 90 degrees. If coping feels too advanced for your skill level, do not worry, a well cut miter joint combined with a bit of caulk at the seam will still give you a clean, professional looking result.<\/p>\n\n\n\n
When measuring outside corners, always add a small allowance, generally a couple of millimeters, to account for the thickness of the saw blade and any minor adjustments you might need to make on site. It is always easier to trim a little more off a piece that is slightly too long than to try to stretch a piece that has been cut too short.<\/p>\n\n\n\n
The wall surface must be clean, dry, and free of dust, grease, or loose paint before applying any adhesive. Even the best glue on the market will struggle to bond properly to a dirty or unstable surface. Wipe down the wall with a damp cloth and allow it to dry completely. If the wall has old paint that is peeling or flaking, lightly sand the area to create a smoother, more stable surface for bonding.<\/p>\n\n\n\n
In kitchens and bathrooms, pay special attention to areas that may have accumulated grease, soap residue, or condensation over time. These invisible layers of residue can seriously weaken the bond of any adhesive, no matter how strong it is on paper. A quick wipe down with a mild degreasing solution, followed by a clean water rinse and thorough drying, will make a noticeable difference in how well your baseboard adheres in these rooms.<\/p>\n\n\n\n
If your walls are particularly uneven, with visible bumps or dips, consider using a bit more adhesive in those specific low spots, or lightly sanding down high spots, so the baseboard can sit as flush as possible against the wall along its entire length. Baseboards that only touch the wall at a few high points tend to develop weak spots over time, since the glue is not evenly distributed across the surface.<\/p>\n\n\n\n
Apply a continuous zigzag line of Parquet Glue along the back of the baseboard, staying about one centimeter from the edges to avoid excess glue squeezing out once pressed against the wall. Thanks to the precision nozzle design, you can control exactly how much product you use, minimizing waste and mess. Unlike many competing adhesives that require a thick, uneven layer, our formula only needs a thin, consistent line to create a powerful bond.<\/p>\n\n\n\n
For longer baseboard pieces, it can help to apply two parallel zigzag lines, one near the top edge and one near the bottom edge of the baseboard back, rather than a single line down the middle. This distributes the adhesive more evenly across the full height of the baseboard and helps prevent any bowing or gapping in the middle section once pressed against the wall, particularly on taller baseboard profiles.<\/p>\n\n\n\n
If you are gluing baseboards in a room with unusually high humidity or temperature, check the product instructions for any adjustments to open time, which is the amount of time you have between applying the glue and pressing the baseboard into place. Working a little faster in very warm conditions will help you achieve the best possible bond before the surface of the glue begins to skin over.<\/p>\n\n\n\n
Position the baseboard against the wall in its final location and press firmly along its entire length. Thanks to the strong initial grab of Ferber Painting Parquet Glue, you should feel the baseboard hold almost immediately. For best results, apply gentle, even pressure for about 30 to 60 seconds. Unlike weaker adhesives that require clamps or extensive taping to hold the piece in place while curing, our glue reduces the need for extra equipment, saving you both time and money.<\/p>\n\n\n\n
For particularly long or heavy baseboard sections, it can still be helpful to use a few strips of painter’s tape as a temporary support while the initial grab sets in fully, especially on vertical sections around door frames where gravity works against you. Simply remove the tape once you are confident the baseboard is holding on its own, usually after a few minutes.<\/p>\n\n\n\n
Work in manageable sections rather than trying to glue an entire room’s worth of baseboard at once. Starting in one corner and working your way around the room piece by piece allows you to maintain better control over alignment and gives you time to double check that each piece is level and properly seated before moving on to the next.<\/p>\n\n\n\n
Once all your baseboards are glued into place, check for any small gaps at the corners or where the baseboard meets the floor. These can be filled with a matching caulk or wood filler for a seamless finish. Allow everything to dry completely, following the curing time indicated on the product packaging, before painting or staining if needed.<\/p>\n\n\n\n
A useful trick when applying caulk to corners and seams is to run a wet finger or a dedicated caulking tool along the bead immediately after application. This smooths the caulk into the gap and removes excess product, leaving a clean, almost invisible line once dry. Painter’s tape applied on either side of the seam before caulking, then removed right after smoothing, can also help you achieve razor sharp, professional looking lines.<\/p>\n\n\n\n
If you plan to paint your baseboards after installation, this is also the moment to fill any nail holes, if you used any additional mechanical fasteners alongside the adhesive, and to lightly sand any rough spots. A smooth, well prepared surface will make a huge difference in how the final paint finish looks.<\/p>\n\n\n\n
Even though Ferber Painting Parquet Glue offers an immediate strong grab, it is important to allow the adhesive to cure fully before subjecting the baseboards to heavy cleaning, vacuuming near the walls, or moving furniture against them. Full curing usually takes between 24 and 48 hours, depending on humidity and temperature in the room. Patience at this final stage ensures a long lasting, durable finish.<\/p>\n\n\n\n
During this curing window, try to keep the room at a stable temperature and avoid opening windows to sudden drafts or blasting heating or air conditioning directly onto the freshly glued baseboards. Sudden temperature swings during curing can sometimes affect how evenly the adhesive sets, so a calm, stable environment will give you the best possible long term results.<\/p>\n\n\n\n
Even with the right materials, a few common mistakes can compromise the final result. Skipping the wall cleaning step is one of the most frequent errors, since dust and grease left on the surface will prevent even the strongest adhesive from bonding properly. Another common mistake is applying too much glue, thinking that more product automatically means a stronger bond. In reality, excess glue often squeezes out from the edges, creating a messy cleanup job and sometimes even preventing the baseboard from sitting flush against the wall.<\/p>\n\n\n\n
Rushing the cutting process is another pitfall. Baseboards cut without careful measuring often leave visible gaps at corners, which are much harder to hide than a small caulk line at a well cut joint. Finally, ignoring the acclimation period for wood or MDF baseboards can lead to warping or shrinking after installation, undoing hours of careful work. Taking the time to do each step properly will save you far more time in the long run than trying to rush through the project.<\/p>\n\n\n\n
To help you understand exactly why Ferber Painting Parquet Glue is the superior choice, we have put together a simple comparison table covering the criteria that matter most when choosing a baseboard adhesive.<\/p>\n\n\n\n As you can see, when it comes to baseboard adhesives, Ferber Painting Parquet Glue checks every box that truly matters. From the strength and flexibility of the bond to the peace of mind that comes with our satisfied or refunded guarantee, our product is designed to give you the best possible results with the least amount of stress.<\/p>\n\n\n\n Beyond the criteria listed in the table, it is worth considering the long term cost of choosing the wrong adhesive. A generic glue that fails after a year means you will need to remove the old baseboard, clean the wall again, possibly buy new baseboard material if the old one was damaged during removal, and repeat the entire installation process. When you factor in the cost of materials, tools, and your own time, a slightly higher upfront investment in a reliable adhesive like Parquet Glue ends up being far more economical in the long run.<\/p>\n\n\n\n Once your baseboards are properly glued and fully cured, a little routine maintenance will keep them looking great for years to come. Regular dusting with a soft cloth or a vacuum attachment prevents buildup of dust and debris along the top edge, which is often the most visible part of a baseboard. In kitchens, occasional wiping with a slightly damp cloth helps remove grease splatters before they have a chance to settle into the finish.<\/p>\n\n\n\n Avoid using harsh abrasive cleaners or scrubbing pads directly on painted or stained baseboards, as these can dull the finish over time. If you notice any small scuffs or scratches, a bit of touch up paint or a matching wood marker can restore the appearance quickly without needing to redo the entire baseboard. Because Ferber Painting Parquet Glue creates such a strong, flexible bond, you should not need to worry about reapplying adhesive or dealing with lifting edges for many years, even in rooms that see a lot of foot traffic or humidity fluctuations.<\/p>\n\n\n\n Do I need to remove old baseboards before installing new ones?<\/p>\n\n\n In most cases, yes. Removing old baseboards allows you to properly clean and prepare the wall surface, ensuring the best possible bond with your new adhesive. Trying to install new baseboards over old, damaged ones can compromise the strength of the glue.<\/p>\n\n\n\n Can Ferber Painting Parquet Glue be used on painted walls?<\/p>\n\n\n Yes, our formula is designed to bond effectively to painted surfaces, as well as plaster, concrete, and brick. Just make sure the paint is not peeling or flaking before applying the glue.<\/p>\n\n\n\n How long does it take for the glue to fully cure?<\/p>\n\n\n While the initial grab is almost instant, full curing typically takes between 24 and 48 hours depending on room temperature and humidity levels. We recommend avoiding heavy contact with the baseboards during this period.<\/p>\n\n\n\n What happens if I am not satisfied with the product?<\/p>\n\n\n Thanks to our satisfied or refunded guarantee, you can request a full refund if you are not happy with the results. This is a unique advantage that very few competitors in the market currently offer.<\/p>\n\n\n\n Does Ferber Painting ship internationally?<\/p>\n\n\n Yes, we ship worldwide through a reliable network of international carriers, ensuring that customers anywhere in the world can receive their Parquet Glue quickly and safely.<\/p>\n\n\n\n Fitting and gluing a baseboard is a straightforward project when you follow the right steps and, more importantly, when you use a high quality adhesive designed for long lasting results. As we have seen throughout this guide, the difference between a baseboard that stays perfectly in place for years and one that peels away after a few months almost always comes down to the glue you choose. With its strong initial grab, flexible cured finish, and excellent water resistance, Ferber Painting Parquet Glue offers everything you need for a professional, durable installation, all while being backed by the only satisfied or refunded guarantee in the industry.<\/p>\n\n\n\n Taking the time to properly prepare your walls, measure and cut your baseboards accurately, and apply a trusted adhesive will reward you with results that last for decades rather than months. Whether you are tackling a single room or an entire home renovation, the principles outlined in this guide will help you achieve a clean, professional finish that you can be proud of for years to come.<\/p>\n\n\n\n\n
\n Criteria<\/th>\n Ferber Painting Parquet Glue<\/th>\n Generic Store Brand Glue<\/th>\n<\/tr>\n \n Satisfied or refunded guarantee<\/td>\n Yes, full refund guarantee<\/td>\n Rarely offered<\/td>\n<\/tr>\n \n Bond strength<\/td>\n Strong immediate grab, permanent bond<\/td>\n Variable, often weak initial grab<\/td>\n<\/tr>\n \n Flexibility after curing<\/td>\n Remains flexible, resists cracking<\/td>\n Often becomes brittle over time<\/td>\n<\/tr>\n \n Water resistance<\/td>\n Excellent, ideal for humid rooms<\/td>\n Often limited or none<\/td>\n<\/tr>\n \n Ease of application<\/td>\n Precision nozzle, minimal mess<\/td>\n Often messy, uneven application<\/td>\n<\/tr>\n \n International shipping<\/td>\n Fast worldwide delivery<\/td>\n Often limited to local markets<\/td>\n<\/tr>\n \n Online payment and ordering<\/td>\n Simple, secure checkout online<\/td>\n Varies by retailer<\/td>\n<\/tr>\n<\/table><\/figure>\n\n\n\n Maintaining Your Baseboards After Installation<\/h2>\n\n\n\n
Frequently Asked Questions<\/h2>\n\n\n\n
Conclusion<\/h2>\n\n\n\n