Tiling Waterproof Sealant

Our sealant under tiling, casing and waterproofing of concrete slabs offers a flexible coating that protects even cracked structures. This waterproofing system before tiling for terraces, bathrooms and walk-in showers is also used by major French and international construction groups for waterproofing pools and tanks. Product ready to use and quick drying.

Application temperature: +5°C to +30°C.

Service temperature limit: -20°C to +80°C.

Yields (two coats):

Concrete, coated or pressurized bases: 3,5 to 4 kg/m²,
Concrete wall, precast elements: 4 to 4,5 kg/m²,
Terraces, balconies, water features: 4 kg/m²,
Ponds, reservoirs, water towers: 4 kg/m².

Drying time: 6 hours between coats.

Resistance to instantaneous cracking (NF P 84-402) at +23°C.

Compressive strength: 250 bar at 28 days, +20°C and 60% humidity.

Maximum qualities reached in 28 days.

PROPERTIES:

Ready-to-use, quick-drying liquid mix.

High resistance to corrosion, abrasion and erosion.

Excellent resistance to pressure and back pressure.

Freeze and thaw resistance.

Protection of even cracked structures.

Ideal under-tile sealing system.

Flexible, waterproof coating with perfect adhesion to substrates.

Very good UV resistance.

DESTINATION:

• Terraces, balconies, water features, concrete superstructures, car parks, exterior protection of masonry, protection of concrete structures subject to salts: parapets, bridge piles, concrete slides, gutters, sidewalks, pavement, fine repairs, protection of steel « with flowers », sealing of joints between floors and walls, leveling of foundations.

• Eligible materials : poured concrete, reinforced concrete, tiles, traditional masonry, coated bricks and coated agglomerates.

RECOMMENDATIONS:

• First remove the laitances, dust and crumbly parts, oil stains and other dirt. Before applying the first coat, moisten the substrate well. Do not moisten between coats.

• Avoid application in the evening because of the return of stored heat, work on frozen substrates, application in full sun and in drying winds.

• The use of a brush is recommended for the application of the coating, as it promotes the penetration of the product into the pores and the elimination of air bubbles. You can also use a trowel or trowel.

APPLICATIONS:

• In the case of application by mechanical spraying, use a low-speed machine, spray the coating methodically in an even coat without overloading or gaps and smooth with a trowel or a brush, in order to perfect the debubbling .

• Concrete bases, coated or under pressure: on the moistened but not dripping support, apply 2 coats:

◦ 1st coat: 2 kg/m², 2,5 kg/m²,

◦ 2nd coat: 1,5 kg per m².

• Concrete wall, prefabricated elements:

◦ 1st coat: 2,5 kg/m² with mandatory incorporation of a fiberglass reinforcement between the first and second coat,

◦ 2nd coat: 1,5 to 2 kg per m².

• Terraces, balconies, water features:

◦ 1st coat: 2,5 kg/m² with mandatory incorporation of a fiberglass reinforcement between the first and second coat,

◦ 2nd coat: 1,5 to 2 kg per m².

• Swimming pools, ponds, reservoirs, and castles:

◦ 1st coat: 2,5 kg per m² with compulsory incorporation of a reinforcement in the first coat,

◦ 2nd coat: 1,5 to 2 kg per m².

• Maximum qualities reached after 28 days of drying, but light pedestrian traffic possible after 48 hours, covering with paint and replenishing with water after 14 days.