Concrete and Cement Hardener

Our concrete and cement hardener is made from active minerals which, combined with free lime from cement or limestone, form perfectly indissoluble and very solid fluates. This reaction causes a very strong reduction of the dust, as well as of the capillaries of the support.

   Application temperature: +5°C to +45°C.

   Service limit temperature: -45°C to +90°C.

   Consumption: 0.1 to 0.25 liters per m² (1 liter for 4 to 10 m²).

   Drying time between two coats: 48 hours.

   Dust drying time: 48 hours.

   Return to circulation:  48 hours.

PROPERTIES:

   Colorless product.

   Monocomponent, ready to use.

   Increased support resistance by more than 30%.

   Strong resistance to marine, urban and industrial atmospheric agents.

   Increased chemical resistance against fats (fats and oils), diluted bases and organic acids.

DESTINATION:

•   Concrete screeds and slabs, limestone facings.

•   Eligible materials: all porous supports such as concrete, cement or limestone.

•   No use if support closed (no penetration).

RECOMMENDATIONS:

•   The support must be completely dry, degreased, dust free, sound and adherent. Eliminate non-adherent particles such as rust, mud or scale.

•   Apply with sprayer, roller or brush. Clean tools with cold water.

APPLICATION:

•   Application by spray, brush or roller, in one or two coats. The drying time between the two coats is 48 hours.

•   Return to circulation is also possible after 48 hours of application. Can be covered with epoxy or acrylic type paints. The use of glycerophthalic paints is not recommended.