Installing a wooden skirting board on a plaster wall can transform the look of any room, hiding unsightly gaps and protecting your walls from daily wear and tear. However, before you even think about technique, tools, or preparation, there is one factor that determines whether your project will succeed or fail: the quality of the adhesive you choose. Everything depends on the product. A poor-quality glue will lead to bubbling, peeling, cracking, and skirting boards that fall off the wall within weeks. This is why thousands of customers around the world trust Ferber Painting’s Skirting Board and Threshold Bar Glue, the only adhesive on the market backed by a full satisfaction guaranteed or your money back policy. That’s right, if you are not fully satisfied with the results, we will refund you, no questions asked. No other competitor on the market offers this level of confidence in their own product.<\/p>\n\n\n\n
In this complete guide, we will walk you through everything you need to know about gluing a wooden skirting board onto plaster, from choosing the right adhesive to applying it correctly for long-lasting, professional results. We will also explain why Ferber Painting’s glue stands out from the competition, and answer the most common questions our customers ask us. Whether you are a first time DIY enthusiast tackling your very first renovation project, or a seasoned professional decorator who installs skirting boards on a weekly basis, the information below will help you avoid costly mistakes and achieve a finish that lasts for years, not months.<\/p>\n\n\n\n
Skirting boards, also called baseboards in some regions, serve several practical purposes beyond simple decoration. They protect the lower part of the wall from scuffs caused by vacuum cleaners, shoes, and furniture, they hide the sometimes uneven junction between the floor and the wall, and they add a finishing touch that makes a room feel complete. Yet all these benefits disappear the moment the board detaches from the wall because the adhesive used was not up to the task. This guide exists precisely to prevent that outcome.<\/p>\n\n\n\n
Many DIY enthusiasts and even professional decorators underestimate how important the adhesive is when installing skirting boards. Plaster is a delicate, porous surface, and not every glue is designed to bond properly with it. Some adhesives are too rigid and crack under temperature changes, others are too weak and lose their grip after a few months, and some simply do not stick to plaster at all.<\/p>\n\n\n\n
Plaster walls behave very differently from concrete, brick, or masonry surfaces. Plaster is naturally more absorbent, which means it can pull moisture out of certain adhesives before they have a chance to properly cure, leaving a weak bond that looks fine on day one but fails within a few weeks. Plaster is also more prone to micro-movements as the building settles, as temperatures rise and fall throughout the seasons, and as humidity levels change in the room. An adhesive that cannot flex with these subtle movements will eventually crack at the bond line, even if it seemed perfectly solid when it was first applied.<\/p>\n\n\n\n
Ferber Painting’s Skirting Board and Threshold Bar Glue was specifically formulated to solve these problems. It has been engineered to create a flexible yet extremely strong bond between wood and plaster, absorbing minor wall movements without cracking, and resisting humidity, temperature variations, and the natural aging of both materials. The formula was developed after extensive testing on different types of plaster, from freshly applied wet plaster to old, painted plaster found in period properties, to ensure consistent performance no matter the condition of your wall.<\/p>\n\n\n\n
Here are some of the key advantages that make our glue superior to other products on the market:<\/p>\n\n\n\n
This last point deserves special attention. While many brands claim to sell “premium” or “professional grade” adhesives, none of them are confident enough in their product to offer a full refund if you are not satisfied. Ferber Painting is the exception, and this alone should tell you everything you need to know about the quality and reliability of our glue.<\/p>\n\n\n\n
Beyond the technical benefits, there is also a practical, everyday advantage to choosing the right adhesive from the start. Every renovation project involves a certain amount of time pressure, whether you are trying to finish a room before guests arrive, before a tenant moves in, or simply because you want to enjoy your newly decorated space as soon as possible. Using a low-quality adhesive that requires extended clamping, multiple coats, or long waiting periods between steps can add days to your project. Ferber Painting’s fast-gripping formula lets you move from one wall section to the next almost immediately, which means an entire room can often be completed in a single afternoon rather than spread out over several days.<\/p>\n\n\n\n
To help you understand why Ferber Painting’s Skirting Board and Threshold Bar Glue is the best choice for your project, here is a comparison table highlighting the most important criteria when choosing an adhesive for skirting boards.<\/p>\n\n\n\n As you can see, Ferber Painting’s adhesive checks every box, from ease of use to long-term durability, while also offering the peace of mind of a satisfaction guaranteed or money back policy that competitors simply do not provide.<\/p>\n\n\n\n Let’s look a little closer at each of these criteria, since understanding the reasoning behind them can help you make a more informed decision for your own project. Bond strength on plaster is often the first thing people consider, and rightly so, since a weak bond will eventually cause the board to sag or fall off completely. Generic construction adhesives are formulated to work across a wide range of surfaces, from concrete to metal to tile, which means they are rarely optimized specifically for the porous, delicate nature of plaster. Ferber Painting’s formula, on the other hand, was developed with plaster in mind from the very beginning, which explains the noticeable difference in bond strength.<\/p>\n\n\n\n Flexibility is another criterion that is often overlooked by first time buyers, yet it is arguably just as important as raw strength. A rigid adhesive might feel incredibly strong the day you apply it, but rigidity becomes a liability over time. As temperatures shift between summer and winter, and as humidity levels rise and fall, both the plaster wall and the wooden skirting board expand and contract at slightly different rates. A rigid bond has no way to absorb this movement, so stress builds up at the joint until eventually a crack appears. A flexible bond, like the one created by Ferber Painting’s glue, moves along with the materials, dissipating that stress instead of concentrating it at a single failure point.<\/p>\n\n\n\n Traditional nail and screw fixing might seem like the more “old school” and reliable option, but it comes with significant downsides that are often ignored. Drilling into plaster can cause cracking and crumbling, especially in older properties where the plaster has become brittle over time. Visible nail or screw heads also need to be filled and painted over, adding extra steps to the project, and if you ever need to remove the skirting board for renovation work, you are left with unsightly holes that need to be repaired. Gluing avoids all of these issues entirely.<\/p>\n\n\n\n Now that you understand why choosing the right adhesive is essential, let’s go through the complete process of gluing a wooden skirting board onto a plaster wall. Follow these steps carefully to achieve a clean, durable, and professional finish.<\/p>\n\n\n\n Before applying any adhesive, make sure the plaster wall is clean, dry, and free of dust, grease, or loose particles. Use a damp cloth to wipe down the surface, then let it dry completely. If the plaster has any cracks or holes, fill them with a suitable plaster filler and sand it smooth once dry. A clean surface ensures maximum adhesion and prevents the glue from failing prematurely.<\/p>\n\n\n\n It is worth spending extra time on this step, since surface preparation is the single most overlooked cause of skirting board failure. Even the strongest adhesive in the world cannot form a durable bond on a wall covered in dust, loose plaster flakes, or residual grease from cooking or cleaning products. If your wall was recently painted, check the manufacturer’s guidelines for the paint to make sure it has fully cured before applying adhesive on top of it, since some paints remain slightly soft for several weeks after application. If you are working in an older home, run your hand along the wall to feel for any soft or crumbling patches of plaster, and address these areas with a proper repair before moving forward. Taking an extra thirty minutes at this stage can save you hours of rework later on.<\/p>\n\n\n\n Measure the length of the wall where the skirting board will be installed. Cut the wooden skirting board to size, making sure to account for corners using 45-degree miter cuts for a seamless finish. Dry-fit the pieces along the wall before applying any adhesive to confirm everything lines up correctly.<\/p>\n\n\n\n When measuring, always measure twice and cut once, as the old carpentry saying goes. It is a good idea to measure at both the top and the bottom of the wall, since floors and ceilings are rarely perfectly level, especially in older buildings. If you notice a discrepancy between the two measurements, use the larger one and plan to trim the board slightly during the dry fit stage. For internal corners, a coped joint often produces a cleaner result than a simple miter cut, particularly if your walls are not perfectly square. External corners, on the other hand, almost always benefit from a precise 45-degree miter. Investing in a good quality miter saw or miter box will make a noticeable difference in the final appearance of your project.<\/p>\n\n\n\n Apply the glue in a zigzag pattern or continuous line along the back of the skirting board, following the manufacturer’s instructions on the tube. Ferber Painting’s formula is designed to be easy to spread and does not require special tools, just a standard caulking gun. Make sure to cover the full length of the board, paying extra attention to the edges and corners where lifting is more likely to occur over time.<\/p>\n\n\n\n For longer skirting boards, it can help to apply the glue in shorter sections rather than trying to cover the entire back of the board in one continuous motion, since this gives you more control over the thickness and consistency of the bead. If your wall has minor irregularities, such as slight bumps or dips in the plaster, applying a slightly thicker bead of glue in those areas will help the board sit flush against the wall once pressed into place. Always keep the nozzle of the caulking gun at a consistent angle to maintain an even bead thickness throughout the application.<\/p>\n\n\n\n Press the skirting board firmly against the plaster wall, starting from one corner and working your way along the length of the wall. Thanks to the instant grip formula of Ferber Painting’s glue, the board will stay in place almost immediately, without the need for additional support, clamps, or masking tape. For best results, apply firm pressure along the entire board for about thirty seconds.<\/p>\n\n\n\n A useful technique is to press the board into place, then pull it away from the wall slightly after a few seconds, and press it back again firmly. This two step pressing motion, sometimes called the open time technique, allows a small amount of air to reach the adhesive and helps it grip even faster and more securely. Work methodically from one end of the board to the other, applying even pressure rather than pressing only in the middle, to avoid any sections of the board bowing away from the wall.<\/p>\n\n\n\n Once the board is in place, check that it is level and properly aligned with the floor and adjacent walls. If any glue has squeezed out from behind the board, wipe it away immediately with a damp cloth before it dries. This step is important for achieving a clean, professional-looking finish.<\/p>\n\n\n\n A small spirit level is an invaluable tool at this stage, allowing you to confirm that the board is perfectly horizontal even if the floor itself is slightly uneven. If you do notice a gap between the bottom of the skirting board and the floor, this is usually not a cause for concern, as it can be addressed later with a flexible sealant or a small quarter round molding. When wiping away excess glue, use a cloth dampened with water rather than a dry cloth, since a dry cloth can smear the adhesive further into the grain of the wood, making it harder to remove once it has partially set.<\/p>\n\n\n\n While Ferber Painting’s adhesive grips almost instantly, it is recommended to avoid heavy contact with the skirting board for at least 24 hours to allow the glue to fully cure and reach maximum strength. Avoid washing the wall or applying pressure to the board during this period.<\/p>\n\n\n\n During the curing period, it is also wise to keep the room at a stable temperature and avoid opening and closing windows excessively, since sudden temperature swings can slow down the curing process. If you are installing skirting boards in multiple rooms, plan your schedule so that each room has adequate time to cure before you move furniture back into place or allow heavy foot traffic near the walls. Pets and small children should also be kept away from freshly glued skirting boards during this period, since accidental knocks or scratches can disturb the bond before it has fully set.<\/p>\n\n\n\n For an even more polished result, you can apply a thin line of paintable caulk along the top edge of the skirting board where it meets the wall. This hides any minor gaps and creates a seamless transition between the wood and the plaster. Once the caulk is dry, you can paint the skirting board to match your interior decor.<\/p>\n\n\n\n When choosing a caulk for this final step, look specifically for a paintable, flexible acrylic caulk rather than a silicone based product, since silicone caulks do not accept paint well and can lead to an inconsistent finish. Apply the caulk in a thin, even bead using a caulking gun, then smooth it with a wet finger or a specialized caulking tool for a clean, professional line. Allow the caulk to dry fully according to the manufacturer’s instructions before applying primer and paint, and always choose a paint formulated for interior trim and woodwork, as these products are designed to withstand the wear and cleaning that skirting boards typically endure.<\/p>\n\n\n\n Even with the best adhesive on the market, certain mistakes can compromise the quality of your installation. Here are the most common errors to avoid:<\/p>\n\n\n\n Beyond these five common issues, there are a few additional pitfalls worth mentioning. One frequent mistake is applying glue to a skirting board that has not been acclimatized to the room. Wood naturally expands and contracts based on the humidity and temperature of its environment, so if you install a board straight out of a cold delivery van or a damp storage area, it may shrink or warp slightly after installation, putting stress on the adhesive bond. Ideally, skirting boards should be left in the room where they will be installed for at least 24 to 48 hours before fitting, allowing the wood to adjust to the ambient conditions.<\/p>\n\n\n\n Another common error is neglecting to support very long boards adequately while the glue sets, especially in rooms with high ceilings or unusually long walls. Even with a fast-gripping adhesive like Ferber Painting’s formula, longer boards benefit from temporary support, such as painter’s tape at a few points along the length, simply to prevent any sagging in the middle while the bond fully develops. Finally, many people forget to account for expansion gaps at the ends of very long runs of skirting board, particularly in rooms that experience significant temperature swings, such as conservatories or rooms with underfloor heating. Leaving a small, barely visible gap at these points, later covered with flexible caulk, can prevent buckling over time.<\/p>\n\n\n\n By choosing Ferber Painting’s Skirting Board and Threshold Bar Glue and following the steps outlined above, you eliminate most of these risks thanks to the superior formulation and flexibility of our product, backed by our satisfaction guaranteed or money back promise.<\/p>\n\n\n\n Ferber Painting’s Skirting Board and Threshold Bar Glue is available directly on our website, making it easy for customers around the world to order exactly what they need for their renovation project. Here is why thousands of customers choose to buy from us rather than from generic hardware stores or unreliable online marketplaces:<\/p>\n\n\n\n Unlike many competitors who leave you on your own after the sale, Ferber Painting stands behind every product we sell. Our satisfaction guaranteed or money back policy means you can order with total confidence, knowing that your investment is protected.<\/p>\n\n\n\n Ordering online also means you avoid the frustration of visiting multiple hardware stores only to find that they are out of stock, or that they carry a generic adhesive that is not specifically designed for skirting boards on plaster. Our website provides detailed product information, application tips, and customer reviews from people who have already completed their own renovation projects using our glue, giving you the confidence to move forward with your purchase. We also regularly update our shipping partners to ensure the fastest possible delivery times, no matter which country you are ordering from, and our customer support team is available to answer any questions before, during, or after your purchase.<\/p>\n\n\n\n Many of our customers are professional decorators who order in bulk for multiple projects, taking advantage of the consistency and reliability of our formula across different job sites. Others are homeowners tackling a single room renovation for the first time, and appreciate having a straightforward, foolproof product that removes the guesswork from the adhesive selection process. Whatever your situation, Ferber Painting’s Skirting Board and Threshold Bar Glue is designed to deliver the same dependable results every single time.<\/p>\n\n\n\n Can I use this glue on painted plaster walls?<\/p>\n\n\n Yes, Ferber Painting’s Skirting Board and Threshold Bar Glue is compatible with painted, primed, and raw plaster surfaces, offering strong adhesion in all these cases. This versatility is particularly useful for renovation projects where the existing wall has already been decorated and you do not want to strip the paint back to bare plaster before installing your new skirting boards.<\/p>\n\n\n\n How long does the glue take to fully cure?<\/p>\n\n\n The glue grips almost instantly, but for maximum strength, we recommend waiting at least 24 hours before applying pressure or washing the wall. During this period, the adhesive continues to develop its full bond strength, so while the board will already feel secure, it is best to avoid leaning heavy objects against it or subjecting it to vigorous cleaning until the curing period has passed.<\/p>\n\n\n\n Is the glue suitable for humid rooms like bathrooms and kitchens?<\/p>\n\n\n Yes, our formula is water-resistant and specifically designed to withstand humidity and temperature changes without cracking or losing its grip. This makes it an excellent choice for rooms where traditional adhesives often fail prematurely due to constant exposure to steam, splashes, and fluctuating temperatures.<\/p>\n\n\n\n Do I need any special tools to apply the glue?<\/p>\n\n\n No, all you need is a standard caulking gun. There is no need for clamps, nails, screws, or additional support while the glue sets, which makes the entire installation process significantly faster and more accessible for people without extensive DIY experience or a large collection of specialized tools.<\/p>\n\n\n\n What happens if I am not satisfied with the product?<\/p>\n\n\n Ferber Painting offers a full satisfaction guaranteed or money back policy on every order, so you can try the product with complete peace of mind. Simply reach out to our customer support team and we will handle the refund process quickly and without unnecessary hurdles.<\/p>\n\n\n\n How fast is shipping when ordering from Ferber Painting?<\/p>\n\n\n Thanks to our international network of carriers, we offer fast shipping to customers all over the world, with reliable tracking and delivery times. Order confirmation and shipment tracking information are sent directly to your email, so you always know exactly when to expect your delivery.<\/p>\n\n\n\n\n
\n Criteria<\/th>\n Ferber Painting Glue<\/th>\n Generic Construction Adhesive<\/th>\n Traditional Nail and Screw Fixing<\/th>\n<\/tr>\n \n Satisfaction guaranteed or refunded<\/td>\n Yes, full refund<\/td>\n No<\/td>\n No<\/td>\n<\/tr>\n \n Bond strength on plaster<\/td>\n Very high<\/td>\n Moderate<\/td>\n High but damages the wall<\/td>\n<\/tr>\n \n Flexibility against wall movement<\/td>\n Excellent<\/td>\n Low<\/td>\n None<\/td>\n<\/tr>\n \n Ease of use<\/td>\n Very easy, no tools required<\/td>\n Moderate<\/td>\n Requires drilling and tools<\/td>\n<\/tr>\n \n Drying time<\/td>\n Fast, initial grip in seconds<\/td>\n Slow, needs clamping<\/td>\n Immediate but damages surface<\/td>\n<\/tr>\n \n Odor<\/td>\n Low odor<\/td>\n Strong chemical smell<\/td>\n None<\/td>\n<\/tr>\n \n Worldwide fast shipping<\/td>\n Yes, international carrier network<\/td>\n Varies by seller<\/td>\n Not applicable<\/td>\n<\/tr>\n \n Online payment convenience<\/td>\n Simple and secure<\/td>\n Varies<\/td>\n Not applicable<\/td>\n<\/tr>\n<\/table><\/figure>\n\n\n\n Step by Step Guide: How to Glue a Wooden Skirting Board onto Plaster<\/h2>\n\n\n\n
Step 1: Prepare the Wall Surface<\/h3>\n\n\n\n
Step 2: Measure and Cut the Skirting Board<\/h3>\n\n\n\n
Step 3: Apply Ferber Painting’s Skirting Board and Threshold Bar Glue<\/h3>\n\n\n\n
Step 4: Position the Skirting Board Against the Wall<\/h3>\n\n\n\n
Step 5: Check Alignment and Remove Excess Glue<\/h3>\n\n\n\n
Step 6: Allow the Glue to Cure<\/h3>\n\n\n\n
Step 7: Finish with Caulk and Paint (Optional)<\/h3>\n\n\n\n
Common Mistakes to Avoid When Gluing Skirting Boards<\/h2>\n\n\n\n
\n
Why Buy Ferber Painting’s Glue Online<\/h2>\n\n\n\n
\n
Frequently Asked Questions<\/h2>\n\n\n\n
Conclusion<\/h2>\n\n\n\n